Brady THT-BP Precision Manuel de l'opérateur télécharger pdf (Page 59)

59Transfer Printer THT-BP Precision

Demand sensor - Limit peel-off spd.

This parameter allows to limit the print speed in peel-off mode to 4 ips

(100mm/s).

When a printer is delivered, the maximum print speed in peel-off mode is

limited to 4 ips (100mm/s). Even if the print speed for the peel-off mode is set

higher in the software, the print job will be carried out with a speed of 4 ips

(100mm/s). This limitation guarantees correct operation in peel-off mode when

using maximum supply rolls (diameter 7.9 in (200mm), width 4.7 in (120mm)).

When using smaller supply rolls it is possible to operate with higher speed. For

that purpose the speed limitation must be switched off. Then the print speed

can be set on all speeds up to 8 ips (200mm/s) for BP Precision 200P or 6 ips

(150mm/s) for BP Precision 300P.

CAUTION !

When operating the BP Precision 200P/300P in peel-off mode with higher

speed it is strongly recommended to carry out some tests beforehand by

using appropriate rolls with maximum diameter !

The speed limitation in the peel-off mode does not affect any other operation

modes like tear-off mode, cut mode or external rewinding.

Cutter

When the optional cutter is attached, the "Cutter" menu appears in the

"Machine parameters" menu.

The menu contains all of the parameters for the cut function.

Detailed information is available in the cutter documentation.

Applicator

When an optional applicator is attached, the "Applicator" menu appears in the

"Machine parameters" menu.

The menu contains all of the parameters for the applicator function.

Detailed information is available in the applicator documentation.

Brightness LCD

This parameter adjusts the level of brightness for the background on the

display.

Contrast LCD

This parameter adjusts the level of contrast to improve readability on the

display.

8. Printer Configuration

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 131 132

Pas de commentaire

Brady THT-BP Precision Manuel de l'opérateur Page 59