Brady BP-PR PLUS Series Instructions d'exploitation télécharger pdf (Page 32)

32 Operating Instructions Edition 7/06

Cleaning and basic maintenance

BP-PR PLUS series

8.8 Replacing the print roller and rewind assist roller

Fig. 19: Removing the side plate

Removing the side plate

1. Turn lever (1) counterclockwise to lift the

printhead.

2. Lift the pinch roller (5) off the rewind assist

roller.

3. Remove labels and transfer ribbon from

the printer.

4. Loosen screws (4) on plate (6) with hexag-

onal wrench by several turns and remove

plate (6).

5. Unscrew screws (3abc) of the side plate

(2) with hexagonal wrench.

6. Remove side plate (2).

Fig. 20: Removing and installing rollers

Removing and installing rollers

1. Pull print roller (7) and rewind assist roller

(8) from the shafts (9, 10) on the housing.

2. Clean shafts (9, 10) of the rollers (see

expanded view at shaft (10)).

3. Slide print roller (7) and rewind assist roller

(8) onto their respective shafts and turn

slightly until the hexagon of the shaft

engages in the hexagon socket of the print

roller.

4. Set side plate (Item 2, Fig. 19) in place and

screw it down with the screws (Items 3abc,

Fig. 19) by tightening the screws in order,

i.e. a, b then c.

5. Set plate (Item 6, Fig. 19) in place and

tighten screws (Item 4, Fig. 19) with hex-

agonal wrench.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Pas de commentaire

Brady BP-PR PLUS Series Instructions d'exploitation Page 32