Brady BP-PR PLUS Series Instructions d'exploitation télécharger pdf (Page 30)

30 Operating Instructions Edition 7/06

Cleaning and basic maintenance

BP-PR PLUS series

8.7 Replacing the printhead

The printhead of the transfer printer can be replaced without the need for fine adjustment. The printhead

must be replaced if worn or when switching to a printhead with higher or lower resolution. For better dif-

ferentiation, the print heads have a label stating the printer type and resolution.

Fig. 17: Structure of the printhead

1 Head plate

2 Plug connection

3 Plug connection

4 Screw

5 Printing line

6 Pins

7 Printhead

The printhead (7) is preinstalled on a head plate (1) and precisely aligned at the factory. Do not loosen

the screws (4) under any circumstances.

CAUTION!

The printhead can be damaged by static electricity discharges and impacts!

⇒ Set up printer on a grounded, conductive surface.

⇒ Ground your body, e.g. by wearing a grounded wristband.

⇒ Do not touch contacts on the plug connections (2, 3).

⇒ Do not touch printing line (5) with hard objects or your hands.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

Pas de commentaire

Brady BP-PR PLUS Series Instructions d'exploitation Page 30