Brady BP-PR PLUS Series Instructions d'exploitation télécharger pdf (Page 28)

28 Operating Instructions Edition 7/06

Cleaning and basic maintenance

BP-PR PLUS series

8.3 General cleaning

⇒ Remove dust and paper fuzz in the printing area with a soft brush or vacuum cleaner.

⇒ Clean outer surfaces with an all-purpose cleaner.

8.4 Cleaning the print roller

1. Turn lever (4, Fig. 12) counterclockwise to lift the printhead.

2. Remove labels and transfer ribbon from the printer.

3. Remove deposits with roller cleaner and a soft cloth.

4. If the roller appears damaged, replace it (see ”8.8” on page 32).

8.5 Cleaning the printhead

Substances may accumulate on the printhead during printing and adversely affect printing, e.g. differ-

ences in contrast or vertical stripes.

1. Turn lever (4, Fig. 12) counterclockwise to lift the printhead.

2. Remove labels and transfer ribbon from the printer.

3. Clean printhead surface with special cleaning pen or a cotton swab dipped in pure alcohol.

4. Allow printhead to dry for 2–3 minutes before commissioning the printer.

CAUTION!

Abrasive cleaning agents can damage the printer!

⇒ Do not use abrasives or solvents to clean the outer surfaces or assemblies.

CAUTION!

Printhead can be damaged!

⇒ Do not use sharp or hard objects to clean the printhead.

⇒ Do not touch protective glass layer of the printhead.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 39 40

Pas de commentaire

Brady BP-PR PLUS Series Instructions d'exploitation Page 28