Brady TLS2200 Manuel d'utilisateur télécharger pdf (Page 21)

TLS PC Link

Programmer’s Guide

Print Last Label Format (STX G)

This command prints a previously formatted label. This command is used when

there is a label format in the buffer. The STX E command is used to enter the

quantity. (If the STX E command is not used only one label will print.)

Sample:

<STX>G

Feedback possibilities: 1,2,6,7,8,A,B,C,D,E,F,G,H

Enable SOH Commands (STX H)

This command is used to enable Immediate Commands on power-up or to re-

enable them if they have been turned off for downloading image data. If feedback

characters are enabled, a code will be sent out from the printer to inform the host

that Immediate Commands are again enabled.

Sample:

<SOH>D

<STX> IBpTest <CR> data...data

<STX>H

The sample above will disable SOH commands, download a PCX image, then re-

enable SOH commands.

Feedback possibilities: 1,2,5

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 63 64

Pas de commentaire

Brady TLS2200 Manuel d'utilisateur Page 21