Brady TLS2200 Manuel d'utilisateur télécharger pdf (Page 19)

TLS PC Link

Programmer’s Guide

Enable Feeding to Cut Position after Print and Perform a Feed to

Cut (STX c)

This command will feed the printer to the cut position. It will also enable feeding

to the cut position after all future print commands. It is to be used in conjunction

with STX C.

<STX>c

Feedback possibilities (only sent if feedback characters are turned on):

1,2,6,7,8,A,B,E,F,J

Set Quantity for Stored Label (STX E)

This command sets the number of labels to print for the label format currently

stored in the print buffer. The most recent label sent to the printer will

automatically remain stored in the buffer until the printer is reset, turned off, or a

batch is canceled. This command is also used in conjunction with the STX G

command, which will print the labels.

<STX>Ennnn

Where:

nnnn- a four-digit quantity, including leading zeros

Sample:

<STX>E0025

<STX>G

The above sample will print 25 labels of the current label format in memory.

Feedback possibilities: 0,1,2

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 63 64

Pas de commentaire

Brady TLS2200 Manuel d'utilisateur Page 19