Brady LabelMark 3.1 Manuel d'instructions télécharger pdf (Page 22)

Datacomtools.com

Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply

MultiFiber Pro Optical Power Meter and Fiber Test Kits

Data centers are growing, fueled by the proliferation of media, virtualization and the need for more

security and storage. This creates a high demand for 40 Gbps+ ber links. Whether it is using 10

Gbps pre-terminated ber trunks or planning for next-generation 40/100 Gbps performance, data

centers are standardizing on Multi-ber Push-on (MPO) connector solutions.

“SCAN ALL” Function: Scan All function in the MultiFiber Pro Power Meter automatically scans and

tests all 12 bers in MPO connectors taking just 6 seconds to complete all loss or power

measurements. This feature automates the testing of MPO terminated bers and eliminates the

time consuming and manual process of moving the tester from ber to ber while using fan-out

cords.

Built-in Polarity Verication: The simple purpose of any polarity scheme is to provide a

continuous connection from the link’s transmitter to the link’s receiver. For array connectors,

TIA-568-C.0 denes three methods to accomplish this. The polarity measurement of MultiFiber Pro

allows the user to test individual patch cords, permanent links, and channels for correct polarity.

On-board MPO connector: The MPO connector on both the OPM and OLS eliminates the use of

costly & complicated fan-out cords to test MPO ber trunks.

Simple User Interface: Simplies the task of simultaneously presenting polarity, power, and loss

results for 12 bers. The power meter enables the users to easily comprehend the measurement

results of 12 bers simultaneously. The light source identies each ber within the MPO connector

being tested. Any individual measurements that fail the test limit is identied to allow root-cause

analysis. This powerful yet straightforward test set enables everyone to become a ber testing

expert increasing efciency in testing data center projects.

Environmental

Operating temperature -10ºC to +50ºC

Storage temperature -20ºC to +50ºC

Operating humidity 95% (10ºC to +35ºC) non-condensing

75% (35ºC to +45ºC) non-condensing

Uncontrolled <10ºC

Operating altitude 4,000 m

Storage altitude 12,000 m

Vibration Random 2 G, 5 Hz to 500 Hz

Optical Power Meter (Specications apply at 23ºC (73ºF), unless otherwise noted.)

Detector type InGaAs

Calibrated wavelengths 850 nm, 1300 nm, 1310 nm, 1550 nm

Measurement range 0 dBm to -50 dBm

Power measurement linearity ±0.1 dB1

Power measurement uncer-

tainty

±0.35 dB

Power measurement repeat-

ability

< 0.10 dB

Display resolution, dB or dBm 0.01

Power display units dBm, mW, μW

User-selectable limit for loss 0.05 dB to 50.0 dB, in increments of 0.05 dB up to 10.0

dB and 0.1 dB up to 50.0 dB

Auto wavelength detection Yes

Polarity detection Detects A, B, C, and Corning Plug & Play™ Universal

Systems polarities

2 kHz detection Yes

Record storage 3000 records, one ber per record (250 12-ber cables)

External interface USB 2.0, full speed

Optical connector MPO interface for 12-ber, unpinned plugs. Compatible

with 62.5 μm, 50 μm, and singlemode bers. Connector

has a self-closing, protective cover.

Power requirement 2 AA alkaline batteries

Battery life2 >30 hours (typical)

Automatic power-off 10, 20, 30, or 60 minutes (can be disabled by the user)

Low battery warning Low battery icon blinks

Size 5.7 in x 3.2 in x 1.5 in

Weight 10.9 oz (309 g)

850nm Source (Specications apply at 23ºC (73ºF), unless otherwise noted)

Emitter type LED: 850 nm

Wavelength 850 nm: ±30 nm

Spectral width (FWHM) 850 nm: +/- 50 nm (typical)

Output power 850 nm: ≥24 dBm. Max difference between channels

+/-1dB

Power output stability3 ≤ ±0.1 dB over 8 hours

Encircled ux Meets ANSI/TIA-526-14-B, ISO/IEC 14763-3, and IEC

61280-4-1 for 50/125 μm at the source’s optical con-

nector.

Optical connector MPO interface for 12-ber, unpinned plugs. Compatible

with 62.5 μm and 50 μm.

Model Description

MFTK1200 MultiFiber Pro Testing Base Kit includes MultiFiber Pro

Power Meter, 850 light source, test cords, MPO adapt-

ers, MPO OneClick Cleaner, and carrying case

$9995.00

MFTK1400 MultiFiber Pro Testing and Inspection Kit includes

MFTK1200, FT600 FiberInspector Pro with NF370

MPO tip

$13995.00

MFPOWERMETER MultiFiber Pro Optical Power Meter $5995.00

MFMULTIMODE-

SOURCE

MultiFiber Pro Mulitmode 850 nm LED light source $4995.00

FT600 FiberInspector Pro $3780.00

NF370 MPO Fiber Inspection Adapter Tip for FT600 $1075.00

TRC-MPO-PP-B 1 m test cord with MPO/MPO, Pinned/Pinned, Type B

polarity

$280.00

TRC-MPO-UP-B 1 m test cord with MPO/MPO, Unpinned/Pinned, Type

B polarity

$280.00

TRC-MPO-UU-B 0.3 m test cord with MPO/MPO, Unpinned/Unpinned,

Type B polarity

$280.00

BKC-MPO-ULC 1 m breakout cord for MPO Unpinned LC connector $900.00

BKC-MPO-USC 1 m breakout cord for MPO Unpinned SC connector $900.00

ADP-MPO-B Type B polarity MPO adapter $30.00

GLD-MF 1 YR GOLD for MFPOWERMETER/MFMULTIMODE-

SOURCE

$1212.00

GLD-MFTK 1 YR GOLD for MFTK1200, MFTK1400 $1752.00

NFC-IBC-1.25mm OneClick cleaners for 1.25 mm LC and MU connector

and patch cord (5 qty)

$333.00

NFC-IBC-2.5mm OneClick cleaners for 2.5 mm SC, ST, FC connectors

and patch cord (5 qty)

$333.00

NFC-IBC-MPO OneClick cleaners for MPO connector (5 qty) $451.00

NFC-KIT-CASE-E Enhanced Fiber Optic Cleaning Kit Includes (1)

OneClick cleaner for 1.25mm connectors, (1) OneClick

cleaner for 2.5mm connectors, (1) OneClick cleaner for

MPO connectors, a solvent pen, a cleaning cube and

a soft case

$266.00

1. For 850 nm, 0 dBm to -50 dBm. For 1300, 1310, 1550 nm, -5 dBm to -50 dBm

2. Measured power levels ≤0 dBm. Backlight on. Battery life depends on the condition and type of

batteries used. Fluke Networks recommends alkaline batteries

3. 23°C ±2°C, after 10 minutes of warm-up time.

4. Auto wavelength,SCAN ALL, and backlight on. Battery life depends on the condition and type of

batteries used. Fluke Networks recommends alkaline batteries.

Modes 2 kHz modulated, auto wavelength

Power requirement 2 AA alkaline batteries

Battery life4 >30 hours (typical)

Automatic power-off 10, 20, 30, or 60 minutes (can be disabled by the user)

Low battery warning Low battery icon blinks

Size 5.6 in x 3.2 in x 1.6 in

Weight 10.9 oz (309 g)

Select an Individual Fiber: Drilling down to a single ber during testing and troubleshooting is always a challenge in data centers. MuliFiber Pro can troubleshoot

a single ber within an MPO trunk to provide a single ber test result. This increases MPO connector verication and troubleshooting exibility with more precise

reporting.