Brady BP-PR PLUS Series Instructions d'exploitation télécharger pdf (Page 21)

BP-PR PLUS series

Cleaning and basic maintenance

Edition 7/06 Quick Operator’s Guide 21

8.4 Cleaning the label sensor

When: when the label roll is changed

The label sensor can become dirtied with paper dust. This can adversely affect label detection.

CAUTION!

Label sensor can be damaged!

⇒ Do not use sharp or hard objects or solvents to clean the label sensor.

Fig. 14: Cleaning the label sensor

1. Turn lever (1) counterclockwise to lift the

printhead.

2. Remove labels and transfer ribbon from the

printer.

3. Remove hexagonal wrench (5) from its

retainer.

4. Press the latch (3) and slowly pull label sen-

sor outward via the tab (4). Ensure that the

label sensor cable is not tensioned by this.

5. Clean label sensor and sensor units (2) with

brush or cotton swab soaked in pure alcohol.

6. Push label sensor back via tab (3) and set it

(see ”6.1.4” on page 12).

7. Push hexagonal wrench (5) into retainer.

8. Reload labels and transfer ribbon (see ”6.1”

on page 10).

1 2 ... 16 17 18 19 20 21 22

Pas de commentaire

Brady BP-PR PLUS Series Instructions d'exploitation Page 21